OCFD MAX™ 15 Meter Kit

Read the OCFD MAX™ Introduction for more information

Kit Contents

15' #14 insulated wire element with ceramic insulator installed

8' #14 insulated wire element with ceramic insulator installed

13' .05" Kevlar™ Line identified with a yellow wire tie

9' .05" Kevlar™ Line identified with a red wire tie

1' Cold Shrink tape

Instructions

Tools Needed:

Soldering iron or gun

Rosen core solder

Knife with a sharp blade (optional. Small wire cutters may be used.)

Tape measure if the tape markers on the OCFD MAX's™ elements are missing
RADIO WORKS'™ WEB STORE

Available at the RADIO WORKS'™ Web Store

OCFD MAX™ 15 meter element kit for OCFD MAX™ 80 or OCFD MAX™ 40 $19.95
{short description of image}
Do you need coax or antenna support line?

Return to Web Store Index

An Inverted-V configuration is permissible but the angle between legs should be > 140 degrees.

{short description of image}

Trademark credits.
Go to Jim's Notebook: Look up "How long should wire antennas last?

Back to Home Page
Back to Web Store Index
To Antenna Index
 To Antenna Specifications OCFD MAX™ Introduction CAROLINA WINDOM® radiation patterns.
To top of page
{short description of image}
{short description of image}
{short description of image}
{short description of image}
 {short description of image} {short description of image} {short description of image}